Toshiba VE28, Руководство по обслуживанию

Страница: 14 / 84

Reference Information
Toshiba 2-9
GB
22
This function enables you to record up to nine
hours of
programmes. (LP) Your VCR stops automatically after the requested length of time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used)
3
Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result
:
The VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the
CH ( or
)
buttons
or
◆
The LINE IN 1 source using the I.SELECT button for a satellite tuner or external video source
Result
:
The channel number is displayed and the programme can be seen on the television.
5
Select the recording speed (SP/LP) by pressing the SP/LP button as many times as required (see page 20).
6
Hold the REC button down for a while to start recording. Result
:
The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 29).
7
Press the REC button several times to increase the recording time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours (LP)
Result
:
The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically.
8
If you wish to cancel the recording before the end, press ON/STANDBY.
☛
If the end of the tape is reached while recording:
◆
The recording stops
◆
The VCR automatically turns off
Recording a Programme with Automatic Stop
LENGTH 2:30
SET LENGTH :
PRESS
REC
7
8
9
0
MENU
PLA
Y
COUNT
.RST
TIMER
REC
CLR/RST
I.SELECT
COUNT/TR
INDEX
TRK
F
.ADV
6
3
ON/
STANDBY
1
2
3
4
5
6
7
8
9
0
COUNT
.RST
CH
I.SELECT
VTR
TRK
DISPLAY
EJECT
4
4
6
GB
21
Recording a Programme Immediately Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot
record on the tape.
1
If you wish to protect a cassette, break off the tab using a small screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.
1
OK
SP
/L
P
A.DUB
AUDIO
SLOW
REW
ST
OP
FF
P
AUSE
/STILL
CURSOR
7
OK
SP
/L
P
AUDIO
SLOW
REW
ST
OP
FF
P
AUSE
/STILL
CURSOR
5
ON/
STANDBY
1
2
3
4
5
6
7
8
9
COUNT
.RST
CH
I.SELECT
VTR
TRK
DISPLAY
EJECT
4
4
Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 16 and 17.
1
Switch on the television.
2
To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used).
3
Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result
:
The VCR is switched on automatically.
4
Select: ◆
The station to be recorded using theCH
(
or )
buttons
or
◆
The LINE IN 1 source using the I.SELECT button for a satellite tuner or external video source
Result
:
The station number is displayed and the programme can be seen on the television.
5
Select the recording speed (SP/LP) by pressing the SP/LP button as many times as required (see page 20).
6
Hold REC down for a while to start recording. Result
:
The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 29).
7
To stop recording, press
■
once.
➢
◆
If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape.
◆
If you reach the end of the tape while recording, the cassette rewinds automatically.