Toshiba TY-AS100TW, Руководство по эксплуатации

Страница: 12 / 33

11
INITIAL SETTING
N Setting the clock
1. You can set the clock only when the System is turned off
(on standby.)
Press and hold
CLOCK/SLEEP button.
If you have already set the clock before, press and hold
s
CLOCK/SLEEP button until the clock is flashing.
“0:00” flashes on the display until you set the clock.
s
2. Adjust the hour and minute.
or
The clock may gain or lose 1 to 2 minutes per month. You
s
may need to readjust the clock periodically.
To check the current time while the System is
turned on
The time is displayed for a few seconds.
If there is a power failure
The clock loses its settings. You need to set the clock again.
N TIMER
The unit turns on and play desired source (DISC/USB/TUNER)
in your desired time.
Before setting the TIMER:
1. Check that the clock is set to the correct time.
If it is not set, you cannot use the TIMER function.
2. For DISC/USB playback: Insert DISC or USB to the unit.
3. For Radio: Set preset memory.
IF you want to exit timer set mode, according to press
the
STOP button.
Setting the TIMER:
1. Press POWER
1
button to turn on the unit.
2. In standby mode, press and hold (2 seconds) the TIMER
button to start the clock setting mode.
The "ON TIME" is flashing.
3. Press TIMER button.
The "Hour" in flashing
4. Press the PRESET
Z
or
z
button to adjust the hour
and press the TIMER button.
Press the PRESET button once to advance the time by 1
hour. Hold it down to advance continuously.
5. Press the PRESET
Z
or
z
button to adjust the minutes
and then press the TIMER button.
Press the PRESET button once to advance the time by 1
minute.
6. Press the PRESET
Z
or
z
button continues to set
closing time, and press the TIMER button to confirm.
7. Press PRESET
Z
or
z
button to adjust the hour and
press the TIMER button.
8. Press the PRESET
Z
or
z
button to adjust the minutes
and then press the TIMER button.
9. Press the PRESET
Z
or
z
button continues to set
SOURCE, and press the TIMER button to confirm.
10. Press the function button to select the play source
(DISC/USB/TUNER), and then press the TIMER button.
TIMER icon " " will light up to indicate timer setting.
120821̲TY̲AS100TW.indb 11 12.8.21 4:56:10 PM