Toshiba TS2100, Инструкция по эксплуатации

Страница: 41 / 51

DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Cap
Bellows
Lower keep plate
Gasket
Glued to the
bearing case.
Bearing case
Collar
Z170:
Provided
Z340:
Not provided
Shaft for
bellows
Set screw
Upper keep plate
Set screw
Wiring guide
Gasket
Glued to the upper
keep plate.
Arm 2 cover
Gasket
Glued to the
bellows set ring.
Need not be
removed.
Bellows set ring
Need not be removed.
When mounting, apply
the liquid gasket to
these areas.
When mounting, apply
the liquid gasket to this
area.
Fig. 5.3 Upper bellows
5) To mount the bellows, observe the above steps in the reversed order.
Be sure to attach the gasket, and apply the Loctite adhesives to all set bolts.
!
CAUTION
• When dismantling the bellows, DO NOT pull it out by force. Otherwise, the
bellows may rupture.
• Be sure to apply the Loctite adhesives to all set bolts. Otherwise, the dust-
and drip-proof performance is damaged to cause entry of water or dust.
• Be sure to attach the gasket. Otherwise, the dust- and drip-proof
performance is damaged to cause entry of water or dust.
STE 80765
– 41 –