manualshive.com logo in svg

Toshiba TECRA S10, Руководство по обслуживанию

Поделиться
Скачать
Toshiba TECRA S10 Скачать руководство пользователя страница 2

 

ii            [CONFIDENTIAL]   Satellite Pro S300, TECRA A10/S10/P10 Maintenance Manual (960-684) 

 

 

 

 

 

Copyright 

© 2008 by Toshiba Corporation. All rights reserved.  Under the copyright laws, this manual 
cannot be reproduced in any form without the prior written permission of Toshiba.  No patent 
liability is assumed with respect to the use of the information contained herein. 

Toshiba Personal Computer Satellite Pro S300, TECRA A10/S10/P10 Maintenance Manual 

First edition July 2008 
 

Disclaimer 

The information presented in this manual has been reviewed and validated for accuracy.  The 
included set of instructions and descriptions are accurate for the Satellite Pro S300, TECRA 
A10/S10/P10 at the time of this manual's production.  However, succeeding computers and 
manuals are subject to change without notice.  Therefore, Toshiba assumes no liability for 
damages incurred directly or indirectly from errors, omissions, or discrepancies between any 
succeeding product and this manual. 

Trademarks 

IBM is a registered trademark and IBM PC is a trademark of International

 

Business 

Machines Corporation. 
Intel, Intel SpeedStep, Intel Core, Celeron and Centrino are trademarks or

 

registered 

trademarks of Intel Corporation. 
Windows, Microsoft and Windows Vista are either registered trademarks or

 

trademarks of 

Microsoft Corporation. 
Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. 
InterVideo and WinDVD are registered trademarks of InterVideo Inc.  
Photo CD is a trademark of Eastman Kodak. 
i.LINK is trademark and registered trademark of Sony Corporation. 
Other trademarks and registered trademarks not listed above may be used

 

in this manual. 

Содержание TECRA S10

















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды