manualshive.com logo in svg

Toshiba TECRA S10, Руководство по обслуживанию, Страница: 189 / 464

Поделиться
Скачать
Toshiba TECRA S10 Скачать руководство пользователя страница 189

 3.26 Wireless LAN Test Program (Atheros)  

3  Tests and Diagnostics  

Check of the antenna connection 

1.

 

Confirm that the icon for wireless LAN appears at the lower right of the screen under 
the circumstances the wireless LAN communication is available. (It is no problem if a 
cross is shown on the icon.) 

 

 

2.

 

Double-click the icon. If the computer finds any AP (Access Point), the antenna 
marks like as follows will appear. It shows the antenna cables are surely connected to 
the wireless LAN card.  

 

 

3.

 

The following message will appear if the antenna cables are not connected to the 
wireless LAN card or no available access point is found. In this case, check the 
antenna cable connection to the wireless LAN card by disassembling the computer 
following the steps described in Chapter 4, Replacement Procedures. 

 

Satellite Pro S300, TECRA A10/S10/P10  Maintenance Manual (960-684) [CONFIDENTIAL] 

3-61 

Содержание TECRA S10

















































































































































































































































































































































































































































































Отзывы:

Нет отзывов