English
- 2 -
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read
the points below for your own safety. They are of a general nature, intended to help with all electronic consumer
produ
cts.
Air Circulation
Leave more than 10cm around all edges when
wall mounting the LCD display to allow adequate
ventilation. This will prevent overheating and possible
damage to the television. Dusty places should also
be avoided.
Heat Damage
Damage may occur if the LCD display is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity, or locations
where the temperature is likely to fall below 5°C (41°F).
The device you have bought must
be plugged into the grounded electrical outlet. Please
always use the grounded power cord provided.
Manufacturer takes no responsibility for any damages
that may occur as a result of ungrounded usage.
Disconnect your system from the power source in case
of a long period of disuse.
Power
In order to disconnect your product from all power
supplies, first turn off your display and unplug its AC
cable from the power source.
• Always use the earthed AC cable provided.
Cleaning
Disconnect your product from the power supply before
cleaning it.
Do not clean your product while it is switched on. Use
a soft and damp cloth to clean the surface of product.
Do not use chemical cleaners to clean the screen. Do
not apply cleanser directly on your computer.
Vent Holes Of Your Product
Vent holes on the cabinet of your product ensures
stable performance of your computer without
overheating. Do not block these openings in anyway.
• Do not put any objects in the vent holes of your
product. This may cause fire or short circuit of the
internal parts of your product
Temperature & Fire
Do not expose your product close to fire or high heat
sources“
Lightning
To protect the display during a thunder storm, unplug
the power cord.
Repair
Unless a basic implementation on the LCD display is
specified by the producer’s technical department on
a document, do not repair your product by yourself.
Otherwise, your guarantee may get suspended and
you may risk your health or your product. In case of
need, consult your authorized service centre.
Do not throw or drop any object on your LCD display.
Do not keep your product in a humid environment.
