background image

English

   - 3 -

Installation and Important Information

 

Please take note

Very long, continuous use of  stationary images may result in some retention of the image. This is not a defect 

of the product and is not covered under the manufacturer’s warranty. Regular use of other images will prevent 

permanent retention.

Exclusion Clause

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i)  fire;

ii)  earthquake;

iii)  accidental damage;

iv)  intentional misuse of the product;

v)  use of the product in improper conditions;

vi)  loss and/or damage caused to the product whilst in the possession of a third party;

vii)  any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set 

out in the owner’s manual;

viii)  any loss or damage caused directly as a result of misuse or malfunction of the product when used 

simultaneously with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including 

but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused 

during normal operation or misuse of the product.

Locate the LCD display away from direct sunlight 

and strong lights. 

Place the  LCD display on a stable, level surface 

that can support the weight of the LCD display in 

order to maintain stability and prevent it falling over.

The LCD display panels are manufactured using 

an extremely high level of precision technology; 

however, sometimes some parts of the screen may 

be missing picture elements or have

luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position 

where it cannot be pushed or hit by objects, as 

pressure will break or damage the screen. Also, 

please ensure that small items are not inserted into 

slots or openings in the case. 

Avoid using chemicals (such as air refreshers, 

cleaning agents, etc.) on or near the LCD 

display pedestal. Studies indicate that plastics may 

weaken and crack over time from the combination 

effects of chemical agents and mechanical stress 

(such as weight of LCD display). Failure to follow 

these instructions could result in serious injury and/

or permanent damage to LCD display and LCD 

display pedestal.

Cleaning the screen and cabinet…

Turn off the power, and clean the screen and cab-

inet with a soft, dry cloth. We recommend that you 

do not use any proprietary polishes or solvents on 

the screen or cabinet as this may cause damage.

Содержание TD-E401
























Отзывы: