10
How to use the iron
Dry ironing
1
Temperature settings
Press the SET / OFF button to set the temperature according to the fabric you are ironing.
The temperature lamp flashes.
(See page 7)
According to fabric
Attention
z
z
If you are ironing a blended fiber, set the temperature according to the lower temperature fiber.
2
Getting started
You can use the iron when the temperature lamp stops
flashing
and stays
lit
.
(When you take the iron off the stand, the temperature lamp turns off.)
z
z
Put the Steam / Dry lever in the [
Dry] position.
Flashing
Lighting
Stays
lit
when it reaches the set temperature.
Notice
z
z
When you first turn on the power, the iron may emit a slight smell and some smoke, but this will go away as you use it.
z
z
The iron may not slide well when you iron wet clothes.
How to use the mist spray (FVW100 only)
The droplets of water in the mist are larger than in the steam, so the mist remains on the clothes and you can remove
stubborn wrinkles.
Use mist spray on cotton, linen, and similar fibers.
Press the mist button marked with to spray out a mist, then iron the clothes.
Attention
z
z
The first time you press the button, the mist may not come out. Press the mist
button several times.
z
z
Do not press the mist button slowly. If you do so, the water will not mist and
it will come out in big drops.
z
z
Water that is left in the mist shot pipe may drip out of the mist outlet while you
are ironing.
z
z
If this happens, hold the iron upside down and press the mist button several
times to clear the water from the mist outlet before you use the iron.
