61
60
Other
s
How to use the supplied software (Continued)
5
Configure the projector.
[
Channel
]
This item cannot be changed currently.
[
Encryption
]
Click on the
button to select [
Off
], [
64 bit
], or [
128 bit
].
[
Key
]
This accepts input if
Encryption
is set to other than
Off
(input is required). Input a
value from the keyboard.
[
Communication mode
]
Select
Infrastructure
by clicking the
button.
[
SSID
]
This is an ID code for connecting to specific individuals over a wireless LAN. This field
accepts input when set to Infrastructure Transmission Mode. Set the SSID to the
same value as the access point. In factory shipment, this is set to DPJ.
[
Projector name
]
It is recommended this is set to prevent wrong transmission.
[
DHCP
]
Specify by clicking the
button. If this is set to
Used
, the
IP Address
,
Subnet
Mask
, and
Gateway
below are set automatically.
Consult with a network administrator for the settings below, if
DHCP
is not used.
[
IP Address
]
An IP (Internet Protocol) is a data communication protocol. The delivery destination is
an IP address.
[
Subnet Mask
]
This value is to set a limit on the range of IP addresses, and set up a number of sub-
networks.
[
Gateway
]
This is a relay point for connecting different types of network.
6
Press the Settings button.
Communication begins, and the computer configures the projector. When setup is
finished, a message appears in the window telling you than setup is complete.
From the
File
menu, select
Save As...
, and save the settings file on the computer.
■
How to use the JPEG Conversion Tool
The
JPEG Conversion Tool
converts JPEG files not supported by the projector, image
files in other formats, Microsoft
®
PowerPoint
®
files, and the like into JPEG files
supported by the projector. The JPEG files converted with this tool can be displayed by
sending them using the wireless LAN PC card
, or saving them on a memory PC
card
.
●
Launching the JPEG Conversion Tool
The window shown in the figure to the right appears on the computer
screen.
Drag the
Image Quality Settings
slider to the left or right to set the
image quality of the file after conversion. Lower values create smaller
files, but lower the image quality. (It is not possible to restore the
quality of an image after it has been lowered.)
●
Converting an image file
This converts JPEG files using compression formats not supported by the projector,
Windows
®
metafiles (wmf), and bitmapped files (bmp) into JPEG files.
(1) In the
Conversion Method
field, select
Converting image
file
. (Status on launch)
(2) In the
File settings
field, click on the
Browse
button for
Original Image File Name
.
The
Open
dialog box appears.
(3) In the
Open
dialog box:
(a) Specify the
location of the file
to be converted; and
(b) In the
Files of Type
field, click on the
button to
select the file format. A list of files of that format appear
in the
Open
dialog box.
(4) In the
Open
dialog box, select the file to convert,
then click on the
Open
button.
(5) In the
JPEG Conversion Tool
window, in the
File
settings
field, select
Browse
for
File name after
conversion
. The
Save As
dialog box appears.
(6) In the
Save As
dialog box:
(a) Specify the
location
in which to save the
converted file;
(b) Enter a file name of up to 8 characters in the
File Name
field; and
(c) Press the
Save
button.
(7) (a) In the
JPEG Conversion Tool
, click on the
Conversion
button.
(b) A confirmation dialog box opens. Click
Yes
.
The computer converts the file. When it finishes a message
appears informing you that a
JPEG file has been created
.
(1)
(2)
(5)
(7)-(a)
(1)
(2)
(5)
(7)-(a)
(3)-(b)
(3)-(b)
(3)-(a)
(4)
(6)-(b)
(6)-(c)
(6)-(a)
(7)-(b)
(7)-(b)
