Toshiba SV-1000, Руководство пользователя

Страница: 4 / 26

4
Do not place this camera on an unstable cart, stand, tripod, bracket or table. The camera may fall, causing possible injury to a
person, or damage to the product. Use only with stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the camera. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
13. Lightning
For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera
due to lightning and power line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid
electric shock.
14. Overloading
Do not overload the power supply or extension cords as this can result in a risk of fire or electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this camera through openings as they may touch dangerous electrical points or short-out
parts that could result in a fire or electrical shock. Never intentionally spill liquid of any kind on the camera.
16. Servicing
Do not attempt to service this camera yourself as opening or removing covers may expose you to dangerous electrical or other
hazards. Refer all servicing to qualified service personnel.
17. Damage Requiring Service
Disconnect this camera from the power supply and refer servicing to qualified service personnel under the following conditions
as they may pose a safety risk.
a. When the power-supply cord or plug is damaged.
b. If the camera has been submerged in water.
c. If the camera does not operate normally by following the operating instructions in the user's manual. Adjust only those
controls that are covered by the user's manual as an improper adjustment of other controls may result in product damage
and will often require extensive work by a qualified technician to restore the camera to its normal operation.
d. If the camera has been dropped or the cabinet has been damaged.
e. When the camera exhibits a distinct change in performance which indicates a need for service.
f. Other trouble.
18. Replacement Parts
When replacing parts, be sure the service technician uses parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
CAUTION
Operating
Before using, make sure power supply and other cables are properly connected.
While operating, if any abnormal condition or malfunction is observed, stop using the camera immediately and then
contact your local dealer.
Handling
Do not disassemble or tamper with parts inside the camera as opening or removing covers may expose you to dangerous
electrical or other hazards.
Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and contact your dealer. If you continue to use the
camera when there is something wrong with it, the trouble may get worse and an unpredictable problem may occur.