Toshiba SV-1000, Руководство пользователя

Страница: 3 / 26

3
Important Safeguards
NOTICE
1. Read Instructions
Read all the safety and operating instructions before operating the product.
2. Retain Instructions
Retain the safety instructions and user's manual for future reference.
3. Follow Instructions
Follow all operating and use instructions
4. Ventilation
This camera should never be placed near or over a radiator or heat register. If this product is placed in a built-in installation,
verify that there is proper ventilation so that the camera temperature operates within the recommended temperature range.
5. Performance Check
Upon completion of any service or repairs to this camera, ask the service technician to perform checks to determine that the
camera is in proper operating condition
.
6. Cleaning
Disconnect this camera from the power supply before cleaning. If not disconnected damage to product may occur. Care must
be taken when you clean the camera. Scratches and dust will ruin the image quality of your camera. Do not use strong or
abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when it is dirty. In case the dirt is
hard to remove, use a mild detergent and wipe the camera gently.
7. Handling
Do not drop or subject the camera to shock and vibration as this can damage camera.
8. Installation and Storage

Do not install the camera in areas of extreme temperatures in excess of the allowable range.

Avoid installing in humid or dusty places. The relative humidity must be below 90%.

Avoid installing in places where radiation is present.

Avoid installing in places where there are strong magnetic fields and/or electric signals.

Avoid installing in places where the camera would be subject to strong vibrations.
CAUTION
9. Attachments
Do not use attachments not recommended by the camera manufacturer as they may pose safety risks.
10. Power Sources
This camera should be operated only from the type of power source indicated on the information label otherwise there may be
a safety risk. If you are not sure of the type of power supply at your location, consult your product dealer.
11. Power-Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them
creating a safety risk. Pay particular attention to cords at plugs, screws and the point where they exit the product.
WARNING
12. Accessories
WARNING indicates a hazardous situation which,
if not avoided, could result in serious injury or
death.
CAUTION indicates a hazardous situation which,
if not avoided, could result in minor or moderate
injury.
NOTICE indicates information considered
important but not directly hazard-related (e.g.
security, hygiene, equipment or property
damage).