Installation
Stratagy DK
Stratagy DK I&P R2 November 1998
1-31
Refer to the Stratagy Library CD-Rom for more details.
Shutdown and Stop
Syntax:
@KS(1)G(999)
where:
KS(1)
tells the system that it is to shutdown and stop and G(999)
ensures that the
port called, in addition to all other calls in progress on any of the
other ports, are cleared down correctly prior to the shutdown.
Note
Stratagy DK is shutdown when the status LED is off and all the port LED’s are
constant green.
Shutdown and Restart
Syntax:
@KS(5)G(999)
where:
KS(5)
tells the systemto shutdown and restart and G(999) again ensures that all the
ports are cleared down correctly prior to the shutdown and restart.
Important!
Toshiba strongly recommend that User ID’s are set up for both types of
shutdown, and details are given to the system administrator. This will allow
non Stratagy trained engineers to work on the Strata DK and for them if
necessary to fluctuate the Strata DK power without harming Stratagy DK. (
Step 17 “Shut Down the Stratagy DK” on Page 1-40
for more information)
Step 15: Setting Up the Serial Mailbox
Ensure that a mailbox has been set up for the serial number to be read remotely. This will
facilitate upgrades. The serial number can be found on a label on the bottom edge of the
Stratagy DK, so once installed the Stratagy DK would have to be removed from the Strata
DK to be able to read the serial number.
Probably the easiest way is to record the serial number in the System Administration
Mailbox, User ID999, when the system is first installed. It would be a good idea to use a
greeting that a caller would not hear if they accidentally dialled a wrong extension or digit,
such as greeting 7. To hear the serial number of the Stratagy DK, simply log onto the mailbox
and listen to greeting 7.
Note
Once the greeting has been listened to, ensure that the correct greeting is reselected
so that the greeting that contains the serial number is not played to future callers.
Another way would be to program it in the extension field of a User ID, using the P token.
For example, the installer would program the extension field to read: @P(A,B14471)G(999),
where B14471 is the Stratagy DK serial number. To hear the serial number, simply call into
Stratagy DK and dial the user ID that has the token string in the extension field. Stratagy DK
reads the alphanumeric-string in the extension field to the caller, then routes the caller to User
ID 999. This method would also allow technicians access to the system serial number from
the local or remote Admin terminal simply by calling up the extension field in the appropriate
User ID.
H
