Toshiba Strata CIX DKT2404-UDR200, Руководство по эксплуатации

Страница: 12 / 22

DKT2404-UDR200 DECT Repeater
UDR200 REGISTRATION
6 of 16
TOSHIBA
DKT2404-UDR200 Repeater 12/10
Figure 6 – Incorrect Repeater Placement
UDR200 REGISTRATION The UDR200 must be registered to the base station before use.
1. Ensure that the repeater is close to the base station. Connect the AC
adapter cable to the repeater.
CAUTION! Use ONLY the power adapter that came with your
repeater. A different power adapter may cause an
electrical hazard or damage the repeater.
2. Press and hold the registration key on the back of the repeater. This
will start the registration process. The LINK LED on the front of the
repeater will flash once per second (On: 500 ms/Off: 500 ms) in
registration mode.
3. Press and hold the Base Left key (CT Phone select Key) on the base
station. This will start the registration. The POWER LED on the Base
will start to flash, almost twice each second, (On: 300 ms/Off: 300 ms)
in registration mode.
4. Wait 60 seconds for the registration process to complete.
5. When the registration is successful, the LINK LED of the repeater will
stop flashing and stay on.
If the registration fails, the LINK LED on the repeater will slowly flash (On:
1 s/Off: 1 s). If this happens repeat Steps 1 ~ 5.