background image

 

 

 

CE Compliance (for EU only) 

This product complies with the requirements of EMC and Low Voltage Directives including their 
amendments. 

WARNING 
This is a Class A product. In a domestic environment this product may cause radio interference in which 
case the user may be required to take adequate measures. 

Warnung 
Dies ist ein Klasse A Produkt. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen.

 

ATTENTION 
Ce produit est de classe A. Dans un environnement domestique, il peut causer des interférences radio. 
Auquel cas, l’utilisateur sera amené à prendre les mesures adéquates.

 

Atención 
Este es un producto de la clase A. En ambientes domésticos éste producto puede causar radio 
interferencias en cuyo caso el usuario deberá tomar las medldas oportunas.

 

VERWITTIGING 
Dit is een klasse A produkt. Het gebruik hiervan kan radio interferenties veroorzaken die de gebruiker ertoe 
kunnen dwigen sommige maatregelen te moeten treffen.

 

Schallemission: unter 70dB (A) nach DIN 45635 (ISO7779)

 

FCC Notice 
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment 
in a residential area is likely to cause harmful interference in which case the user will be required to correct 
the interference at this own expense. 
 
Changes or modifications not expressly approved by manufacturer for compliance could void the user’s 
authority to operate the equipment. 

Copyright © 2004 
by TOSHIBA TEC CORPORATION 
All Rights Reserved 
570 Ohito, Ohito-cho, Tagata-gun, Shizuoka-ken, JAPAN

 

Microsoft and Windows are registered trademarks of Microsoft Corporation. 
Celeron is a registered trademark of Intel Corporation. 

Avviso 
Questo è un apparecchio di Classe A.  In un ambiente residenziale questo apparecchio quò provocare 
radiodisturbi.  In questo caso può essere richiesto all’utilizzatore di prendere misure adeguate. 

The EA10953A1 AC adapter should be exclusively used for the ST-70 Series POS Terminal. 
The ST-70 Series POS Terminal must be powered by the EA10953A1 AC adapter.  

Содержание ST-70 SERIES























Отзывы: