background image

E

ng

lis

h

 

  Connecting to television

I

MPORTANT!

 

– You only need to make one video connection 

from the following options, depending on the 

capabilities of your television.

 

– Connect the DVD player directly to the 

 

television.

 

Using SCART socket

 

 

A

  Use the scart cable to connect the DVD SCART OUT 

to the corresponding scart input socket on the TV

 

(

cable not supplied).

 

If your DVD player will not be connected to a Stereo 

System or AV Receiver to hear better sound, scart is 

enough for both audio and video connections.

 

Using Composite Video Jack(CVBS)

 

 

A

  Use the composite video cable (yellow) to connect 

the DVD player

'

 s VIDEO(CVBS) jack to the video 

input jack(or labelled as A/V in, Video In or 

 

Composite) on the TV(cable not supplied).

 

To hear the sound of this DVD player through your 

TV, use the audio cables(white/red)to connect 

 

AUDIO OUT(L/R)jacks of the DVD player to 

 

corresponding AUDIO IN jacks on the TV(cable not

 

supplied).

 

 Using HDMI

TM

 cable

 

HDMI IN

HDMI IN

HDTV / DVI TV

 

IMPORTANT!

 

– A simple 1-cable connection with a device 

having an HDMI( high definition multimedia 

interface ) connector allows digital transfer of 

both digital video signals and multi-channel audio 

signals. Use this connection for best picture 

quality.

A

  Use an HDMI cable (not supplied) to connect the DVD 

player’s HDMI out to HDMI IN on the HDMI TV. 

Tips:

- Before making or changing any connections, make sure 

that all the devices are disconnected from the power 

outlet.

- If your TV has a DVI IN jack, you need a HDMI-DVI 

adapter cable to connect the HDMI out jack on the 

DVD player. This HDMI-DVI cable has only video 

output capability, so it is necessary to use separate 

analogue cable to transfer the audio signals. See 

“Connecting to a Stereo System” or “Connecting to a 

Digital AV Receiver” in page 8.

 

Selecting HDMI mode

 

During playback, press HDMI on the remote control to 

select the HDMI video resolution. The video resolution 

changes as follows every time HDMI is pressed.

 

Auto  

g

  480p/576p  

g

  720p  

g

  1080i  

g

  1080p

 

Tips:

 

- If Auto is selected, it follows preference HDMI aspect 

ratio of TV.

 

- The HDMI mode that is not supported by your TV will 

not be selected.

 

- No Sound will be output from the HDMI cable if the 

Digital Output is not set to PCM.

 

-If the audio format of the Digital Output does not 

match the capabilities of your receiver, the receiver 

will produce a strong, distorted sound or no sound at 

all.

 

-If your TV only supports 1080i, 1080p will not be 

selected.

 

-  Because  HDMI  is  an  evolving  technology,  it  is 

possible that some devices with an HDMI input may 

not operate properly with this DVD player.

       - When connecting a HDMI cable and an AV cable 

at the same time, it is recommended to use a HDMI-

certified (*) cable having a width of 20.5mm or below.

       (*) HDMI-certified cable is the cable marked with the 

“HDMI logo” on its connector.

Connections

 

Helpful hint: 

Before making or changing any connections, make sure that all the devices are 

                                          disconnected from the power outlet.

Содержание SD3010KB



























Отзывы: