background image

E

ng

lis

h

DVD Menu Options

B

  Use 

 / 

 to select a setting and press OK to 

 

confirm.

 

Tip:

 

-Depending on the type of disc, you may not be able 

to view the mode as selected.

       

TV System

      The video standard of the DVD player output can be 

selected from “NTSC”, “PAL” or “Multi”.

 

{ NTSC }

: Select if your TV system is NTSC.

 

{ PAL }

: Select if your TV system is PAL.

 

{ Multi }

: The DVD video player automatically 

identifies PAL or NTSC video system of a disc. 

Connect a multisystem TV (PAL/NTSC compatible) to 

view a picture.

 

A playback picture may be distorted when detected a 

signal change between PAL and NTSC on the disc.

 

 With the disc tray opened, you can also press 

number button “3” to switch between “NTSC” and 

“PAL”

.

 

 

Video Out

 

The video output of the DVD player can be selected 

as “RGB” or “HDMI”.

A

  In 

Video 

'

, press 

 / 

 to select { 

Video Out 

}, then 

press 

.

 

RGB

 }

       

Select this for Scart connection.

       { 

HDMI

 }

 

Select this for HDMI output.

B

  Use 

 / 

 to select a setting and press OK to con

-

firm.

 

 When SCART and HDMI cable are connected at 

the same time, "HDMI" will be automatically selected 

as the output of the DVD player. You cannot switch 

to "RGB". Composite video will be output for scart 

output. To select "RGB" output, simply disconnect 

the HDMI cable. The video output will be switched to 

"RGB".

       

 

Smart Picture

 

This DVD player provides four predefined sets of  

picture color settings.

A

  In 

Video 

'

, press 

 / 

 to select {

Smart Picture

 },  

then press 

.

 

Standard

 }

 

Select this for a preset standard picture setting.

 

Vivid

 }

 

Select this to make the picture brighter.

 

Cool

 }

 

Select this to make the picture softer.

 

Personal

 } 

 

Select this to personalize your picture color by       

adjusting the brightness, contrast, tint and color 
(saturation).

B

  Use 

 / 

 to select a setting and press OK to 

 

confirm.

C

  If you select { 

Personal 

}, then proceed to steps 

D

~

G

.

  

The setup menu appears.

Using the Video setup menu

A

 

Press SETUP on the remote control.

  

The system setup menu appears.

 

Aspect Ratio           : 
View Mode                 :

       

4:3

Auto Fit

Aspect Ratio           : 
View Mode                 :

       

4:3

Auto Fit

Aspect Ratio           : 
View Mode                 :

       

16:9
Auto Fit

Video Out                  
Smart Picture            :

:

HDMI
Standard

HD Resolution           :

Auto

JPEG Interval            :

5 Seconds

Language

Video

Audio

Misc

Rating

TV System                 :

PAL

B

 

Press 

 / 

 to select { 

Video

 }, then press 

C

  Press 

 / 

 to select an item, then press 

 to 

access.

 

Example: { 

Video Out

 }

  

The options for the selected item appears.

  

If the selection in the menu is greyed out, that 

means the feature is not available or not possible to 

change at the current state.

D

  Use 

 / 

 to select a setting and press OK to 

 

confirm.

 

Example: { 

RGB

 }

  

The setting is selected and setup is completed.

E

  To exit, press SETUP.

 

 Aspect Ratio

 

 

The picture shape can be adjusted to fit your TV and 

the format must be available on the playback disc. 

Otherwise, the TV display will not affect the picture 

during playback.

A

  In 

Video 

'

, press 

 / 

 to select {

Aspect Ratio

 }, 

then press 

.

 

{

 

4:3

 }

 

Select this if you have a normal TV. A  

'

wide-screen

'

 

source display with black bars on the top and bottom 
will be displayed on the TV screen.

 

16:9

 }

 

Select this for wide-screen TV (frame ratio 16:9).

B

  Use 

 / 

 to select a setting and press OK to 

 

confirm.

 

View Mode

 

Use view mode to scale an image that fits to the TV 

screen

'

s width and height.

A

  In 

Video 

'

, press 

 / 

 to select { 

View Mode

 }, 

then press 

.  

 

Fill

 }

 

Fill the screen with decoded image.

 

Original

 }

 

Display image as its original size.

 

Height Fit

 }

 

Fit the screen height with image height.

 

Width Fit

 }

 

Fit the screen width with image width.

 

Auto Fit

 }

 

Automatically display the decoded image on screen 

at a suitable size.

 

Pan Scan

 }

 

Automatically display decoded image on full screen 

without distortion.

 

Helpful hint

:  Press 

 to go back to previous menu item.

 

 

          Press SETUP to exit the menu item.

Содержание SD3010KB



























Отзывы: