background image

30

Playback (VCR)

Cassette tape playback

To play a prerecorded tape.

Load a prerecorded tape

(When loading a cassette tape without the erase
prevention tab, playback will start automatically).

Preparation:

• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.

(The VCR indicator will light).

1

Press PLAY.
Playback will start. “

” will appear

on the screen for about 4 seconds.

Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
“   ” will appear on the screen for
about 4 seconds.

To stop playback

Stop the playback or recording via STOP on remote.

To discontinue the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.

Notes:
• This VCR selects the playback tape speed SP, LP or SLP au-

tomatically.

• The Cassette tape and DVD disc can be played back simulta-

neously. If you press VCR DVD selector, the tape playback
and DVD playback alternate with each other on the screen
(via CH3, 4 or video connection).

• When you select the VCR mode during DVD playback, DVD

playback will stop automatically after approx. 5 minutes.

2

To start playback

Playback

Rewind or forward the tape

To rewind the tape:

                               Press REW.

To forward the tape:

                                 Press FWD.

Forward/Reverse picture search mode

When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REW or
FWD and hold it down. The unit will resume the tape
advance or rewinding as soon as the button is released.

PLAY

STOP

FWD

REW

VCR DVD

PLAY

STOP

FWD

REW

 2C51501C (E)p30-31

7/10/03, 10:42 AM

30

Содержание SD-V291









































































Отзывы: