18
Basic playback
DVD-V
VCD
CD
Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
indicates a reference page of this manual.
See the page in
for details.
CAUTION
• Keep your fingers clear of the disc as it is spinning.
Neglecting to may cause serious personal injury.
• Be careful not to catch your fingers in the disc holder.
• Do not use a cracked, deformed, or repaired disc.
• Do not tilt, shake or move the main unit while playing. It
may damage the disc.
1
2
3
Preparations
• Connect the AC adapter
16
or the battery pack
60
to the
player.
• When you want to view a disc on a connected TV or monitor
54
, turn on the equipment and select the video input
connected to the player.
• When you want to enjoy the sound of discs from an audio
system
55
, turn the audio system on and select the input
connected to the player.
• If you use the supplied remote control, make sure that
batteries are loaded in it.
15
• If you use the headphones, see “Connecting to
Headphones”.
56
• Press the open switch to open the LCD monitor.
• Before using the player for the first time, remove the
protective sheet beneath the disc cover.
4
Power switch
OPEN button
Disc cover
STOP
ENTER
PLAY
SETUP
TOP MENU
MENU
/ / /
PAUSE
Volume control
Press the open switch and lift the
LCD monitor up.
Do not forcibly open the LCD monitor
to avoid damaging this panel.
Turn on the power.
Slide the power switch to “ON”.
The player turns on and the POWER/CHG
indicator on the player illuminates in green.
The default setting for the language used to
display the OSD of the player is English. You can
change the language (English, French, Spanish).
20
Open the disc cover.
Press OPEN on the main unit.
The disc cover opens.
The disc cover will not open over a certain range.
Do not force the cover open further, as it may
cause damage to the player.
Set a disc.
Place a disc with the playback side down, and
push gently on the center of the disc to affix it
to the spindle.
The player will be unable to recognize or
correctly play the disc if it is not affixed to the
spindle properly.
Close the disc cover.
Press CLOSE on the right corner.
SD-KP19SN_E_P17-30
05.12.13, 3:56 PM
18
