ENG-21
Connections
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 61)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
- DVD-AUDIO only plays back two channel audio through the Digital Audio out.
Multi-channel DVD-Audio discs are output through the Analog outputs.
- SACD plays back only through the Analog outputs. (See pages 60 to 61)
Connection to an Audio System (Dolby Digital or DTS Amplifier)
1
If using an optical cable (not supplied), connect the
DIGITAL
AUDIO OUT (OPTICAL)
terminal on the rear of the DVD player
to the
DIGITAL AUDIO IN (OPTICAL)
terminal of the Amplifier.
If using a coaxial cable (not supplied), connect the
DIGITAL
AUDIO OUT (COAXIAL)
terminal on the rear of the DVD player
to the
DIGITAL AUDIO IN (COAXIAL)
terminal of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO
,
COMPONENT
or
HDMI OUT
terminals on the rear of the DVD
player to the
VIDEO, S-VIDEO
,
COMPONENT
or
HDMI IN
terminals of your TV as described on pages 14 to 18.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external
input
in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Optical Cable
(not supplied)
Coaxial Cable
(not supplied)
or
Dolby Digital or
DTS amp
Connections
00839A-SD-6980SU-1 6/29/05 9:13 AM Page 21