Toshiba SD-37VSR Скачать руководство пользователя

Страница: 37 / 63

Playing a disc

Press OPEN/CLOSE or PLAY on the unit.

The disc tray closes automatically.
On the TV-screen, “

” changes to

“Reading” and then playback
commences.

Press

to select title.

Press ENTER.

• Title is selected and play

commences.

Press STOP to end playback.

Resuming facility

• The unit records the stopped point,

depending on the disc. “

”

appears on the screen. Press

PLAY

to resume playback (from

the scene point).

• If you press

STOP

again (“ ”

appears on the screen.), the unit will
clear the stopped point.

Press

ON/STANDBY.

The DVD/VCR turns on.

Press VCR/DVD to select the DVD mode.

The DVD indicator will light.

Press OPEN/CLOSE.

The disc tray opens.

Place a disc on the disc tray.

With the playback
side down

• There are two different disc sizes. Place the disc

in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD/VCR to malfunction.

• Do not place a disc which is unplayable in this

DVD/VCR.

To start playback in the stop mode

Press

PLAY

Reading

This section shows you the basics on how to play a
disc.

Basic playback (DVD/VCD/CD)

Preparations:

• When you want to view a disc, turn on the TV and select

the corresponding video input connected to the DVD. This
may include component video inputs which is exclusive to
DVD playback.

• When you want to enjoy the sound of discs from the audio

system, turn on the audio system and select the input
connected to the DVD/VCR.

CAUTION

Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.

Display window

OPEN/CLOSE

STOP

Disc tray

VCR/DVD

PLAY

ON/STANDBY

Содержание SD-37VSR
































































Результаты поиска

Содержание SD-37VSR

Отзывы:

Похожие инструкции для SD-37VSR

Бренды по названию

Популярные бренды

Toshiba SD-37VSR, Руководство пользователя

Результаты поиска

Содержание SD-37VSR

Отзывы:

Похожие инструкции для SD-37VSR

Бренды по названию

Популярные бренды