54
Selecting the sound enhancement (E.A.M.)/Setting Background/
Setting Screen Saver
• Turn ON the TV and set to the video input mode.
• Press DVD to select the DVD mode. (The DVD
indicator will light)
Preparation:
1
Press E.A.M.
Selecting the sound enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
2
Select the sound enhancement by pressing
/
.
Each time you press the button, the sound enhance-
ment changes.
Normal:
Normal sound.
3D:
To obtain expansive virtual surround sound
effects from just two speakers.
Dialogue:
To control critical centre channel information
to make dialogue more intelligible (only
when playing a DVD video disc recorded on
the Dolby Digital recording system).
• To use this enhancement on sounds output
from the BITSTREAM/PCM jack, be sure to
set “Audio Out Select” to “PCM.” (see page 55).
To exit the audio enhancement selection Press
CANCEL.
Notes:
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD/VCR is connected to an amplifier equipped
with Dolby Pro Logic Surround, select “Normal”.
Otherwise, Dolby Pro Logic Surround may function
differently than usual.
• Selecting “Dialogue” disables “Dynamic Range Control”
function (see page 52).
• During MP3 playback, the sound enhancement is not
effective.
AB C
: Select
: Enter
Picture
TV Shape 4:3LB
Video Out Select Video
1
Press SET UP in the
stop mode.
Press
or
to se-
lect “Display”.
2
Press
or
to
select “Back-
ground”, then press
ENTER. Press
or
to select your
desired back-
ground, then press
ENTER.
Setting Background
Select the background color or background picture.
Setting Screen Saver (DVD only)
To turn the screen saver on or off.
3
To make the SETUP screen disappear, press SET
UP.
AB C
Display
Screen Saver
On
On-Screen Display On
Gray
Picture
Jacket
Blue
: Select
: Enter
Background Picture
Blue:
Blue background.
Gray:
Gray background.
Picture: Use the picture which appears when you
turn on the DVD/VCR as a background.
Jacket: Use the jacket picture included on some
discs as a background. If it is not included,
a gray background will be substituted.
AB C
: Select
: Enter
Picture
TV Shape 4:3LB
Video Out Select Video
1
Press SET UP in the
stop mode.
Press
or
to
select “Display”.
2
Press
or
to
select “Screen
Saver”, then press
ENTER.
Press
or
to
select “On” or “Off”,
then press ENTER.
3
To make the SETUP screen disappear, press SET
UP.
AB C
Display
Screen Saver
On
Background Picture
On-Screen Display On
On
Off
: Select
: Enter
Off: The screen saver is disengaged.
On: The screen saver operates in 10
minutes after you press PAUSE/
STILL.
2A7A101AE(54-BACK)
14/5/2002, 16:29
54