26
Preparation:
• Turn ON the TV and select the VCR channel on TV.
• Press VCR to select the VCR mode. (The VCR indicator will light)
1
Load a blank cassette tape with the
erase prevention tab intact. (The
DVD/VCR will automatically turn
on.)
2
Select the program (e.g.29) you want to record with CH +/– or
number keys.
1~9 : e.g. 5 = press “5”
10~80 : e.g. 29 = press “2” and “9”.
3
If a recording in Long Play mode is intended, press SP/LP (TAPE
SPEED) to display "LP". (see note on page 28)
4
Press REC on the VCR or REC/OTR on the Remote to begin
recording. Press REC on the VCR again to stop recording after
30 minutes. Each additional press of REC will increase recording
time as shown in the chart below, up to a
maximum of 5 hours. The OTR and recording time will appear
on the screen for about 4 seconds.
One-touch Timer Recording (OTR)
Notes:
• If you wish to watch the DVD playback
during the OTR, press DVD to change
to DVD mode and perform the DVD play-
back (see page 38).
• If the tape supply has not sufficed for
OTR recording, the clock symbol (
) will
blink at the tape-end and then VCR
mode will change to DVD mode.
In this case, press TIMER REC to cancel
the
blink or press EJECT to remove
the cassette tape.
The one-touch timer recording feature
provides a simple and convenient way
to make a timed recording.
To Extend the Recording Time
Press REC/OTR repeatedly until the
desired time appears on the display.
To stop the OTR
Press STOP.
OTR 1 : 30
CH 29
Tape speed: SP
Tape speed: LP
OTR 0:30
CH 29
INDEX
2:00
5:00
4:00
3:00
1:30
Recording
0:30
1:00
Recording
0:30
1:00
1:30
10:00
2:00
3:00
4:00
5:00
.......
SLOW
PAUSE/STILL
SET Ð
INDEX Ð SKIP INDEX +
SET UP
VCR MENU
ENTER
CANCEL
VIDEO Plus+
A-B RPT
INSTANT SKIP
ZERO RETURN
TITLE
SET +
CH +
CH Ð
OPEN/CLOSE
ANGLE
COUNTER RESET
AUDIO
AUDIO SELECT
SUBTITLE
ATR
PLAY MODE
SP/LP
DISPLAY
CALL
TIMER REC
CLOCK
COUNTER
DVD
VCR
ZOOM
AUX
TV/VCR
MEMORY
REC/OTR
RETURN
E.A.M
MENU
PLAY
REW
FWD
STOP
VCR
S
M
H
S P
2A7A101AE(24-29)
14/5/2002, 16:22
26
