Toshiba Satellite S300L Series, Руководство пользователя

Страница: 31 / 202

User’s Manual 1-9
S300L
Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits:
■
Restores the previous working environment more rapidly than does the
Hibernation Mode feature.
■
Saves power by shutting down the system when the computer receives
no input or hardware access for the time period set by the System
Sleep Mode feature.
■
Allows the use of the panel power off feature.
Executing Sleep Mode
You can enter Sleep Mode in one of four ways:
■
Click Start then click the power button ( ) located in the power
management buttons ( ).
Please note that this feature must be enabled within the Power Options
(to access it, click
Start -> Control Panel -> System and Maintenance
-> Power Options ).
■
Click Start then click the arrow button ( ) and select
Sleep
from the
menu.
■
Close the display panel. Please note that this feature must be enabled
within the Power Options (to access it, click
Start -> Control Panel ->
System and Maintenance -> Power Options ).
■
Press the power button. Please note that this feature must be enabled
within the Power Options (to access it, click
Start -> Control Panel ->
System and Maintenance -> Power Options ).
■
When the AC adaptor is connected, the computer will go into Sleep
Mode according to the settings in the Power Options (to access it,
Start
-> Control Panel -> System and Maintenance -> Power Options ).
■
To restore the operation of the computer from Sleep Mode, press and
hold the power button or any key on the keyboard for a short amount of
time. Please note that keyboard keys can only be used if the Wake-up
on Keyboard option is enabled within the HW Setup utility.
■
If the computer enters Sleep Mode while a network application is
active, the application might not be restored when the computer is next
turned on and the system returns from Sleep Mode.
■
To prevent the computer from automatically entering Sleep Mode,
disable Sleep Mode within the Power Options (to access it,
Start ->
Control Panel -> System and Maintenance -> Power Options ).
■
To use the Hybrid Sleep function, configure it in the Power Options.
You can also enable Sleep Mode by pressing FN + F3 - please refer to
Chapter 5, The Keyboard , for further details.