Toshiba Satellite S300L Series, Руководство пользователя

Страница: 160 / 202

8-22 User’s Manual
S300L
LAN
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Operating Basics .
Recovery Discs
Problem Procedure
Cannot access LAN Check for a firm cable connection between the
LAN jack and the LAN hub.
Wake-up on LAN does
not work Make sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN
administrator.
Problem Procedure
Cannot access
Wireless LAN Make sure the computer’s Wireless
communication switch is set to on.
If problems persist, contact your LAN
administrator.
Problem Procedure
The following
message appears
when executing
Recovery Disc
Creator.
“
The Recovery
Disc Creator can
not be launched
because there is
no recovery
partition.
”
You will see this message if you have previously
chosen to remove the partition and are trying to
create “Recovery Media”.
When there is no recovery partition, the
Recovery Disc Creator cannot make Recovery
Media.
However, if you have already created a
“Recovery Media”, you can use it to restore the
recovery partition.
Simply follow the instructions in Restoring the
pre-installed software from your created
Recovery Discs
section in Chapter 1, Getting
Started .
You will be directed to select “Restore Original
Factory Image” from the drop-down menu.
If you have not created “Recovery Media”, please
contact TOSHIBA support for assistance.