Toshiba Satellite Radius X20W-D страница 130 Скачать руководство пользователя

Страница: 130 / 157

While Toshiba has made every effort at the time of publication to ensure the
accuracy of the information provided herein, such information is subject to

change without notice.

TOSHIBA PROVIDES NO WARRANTY WITH REGARD TO THIS

MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN.
ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE AND/OR NONINFRINGEMENT OF
THIRD PARTY RIGHTS ARE HEREBY DISCLAIMED. TOSHIBA
ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED

DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR
TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN.
IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY

INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY
DAMAGES, WHETHER BASED ON TORT, CONTRACT OR
OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS

MANUAL, OR ANY INFORMATION CONTAINED HEREIN OR THE
USE THEREOF.

Trademarks

Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under

license.
ExpressCard is a trademark of PCMCIA.
Blu-ray Disc

™

, Blu-ray

™

and the logos are trademarks of the Blu-ray Disc

Association.
Other trademarks and registered trademarks not listed above may be used in this
manual.

Содержание Satellite Radius X20W-D






























































































































































Результаты поиска

Содержание Satellite Radius X20W-D

Отзывы:

Похожие инструкции для Satellite Radius X20W-D

Бренды по названию

Популярные бренды

Toshiba Satellite Radius X20W-D, Руководство пользователя

Результаты поиска

Содержание Satellite Radius X20W-D

Отзывы:

Похожие инструкции для Satellite Radius X20W-D

Бренды по названию

Популярные бренды