Toshiba Satellite M205-SP3018 Скачать руководство пользователя | Manualshive

Страница: 5 / 52

background image

5

5.375 x 8.375 ver 3.1

Taiwan

The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.

Low power radio frequency electric machinery shall resist against
interference from legal communications or from industrial, scientific and
medical radio emission electric machinery.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for
second generation low-power data communication systems such as this
equipment overlaps that of mobile object identification systems (premises
radio station and specified low-power radio station).

1. Sticker

Please put the following sticker on devices incorporating this product.

2. Indication

The indication shown below appears on this equipment.

1

2.4: This equipment uses a frequency of 2.4 GHz.

2

DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

Article 14 Unless approved, for any model accredited low power radio frequency electric

machinery, any company, trader or user shall not change the frequency,
increase the power or change the features and functions of the original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

aviation safety and interfere with legal communications. In the event
interference is caused, the use of such electric machinery shall be immediately
discontinued. Operation of such products can be resumed only when they are
modified and can no longer cause interference.

The frequency bandwidth of this equipment may operate within the
same range as industrial devices, scientific devices, medical
devices, microwave ovens, licensed radio stations and non-licensed
specified low-power radio stations for mobile object identification
systems (RFID) used in factory product lines (Other Radio Stations).

1. Before using this equipment, ensure that it does not interfere with

any of the equipment listed above.

2. If this equipment causes RF interference to other radio stations,

promptly change the frequency being used, change the location
of use, or turn off the source of emissions.

3. Contact TOSHIBA Direct PC if you have problems with interference

caused by this product to Other Radio Stations.

2.4DSOF4

(1)

(2)

(3)

(4)

«
...
3
4
5
6
7
...
»

Содержание Satellite M205-SP3018





















































Отзывы:

Нет отзывов

Похожие инструкции для Satellite M205-SP3018

VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Бренд: NEC Страницы: 4

Toughbook CF-29LCQGCBM

Бренд: Panasonic Страницы: 3

TravelMate 240 series

Бренд: Acer Страницы: 96

BUNDLES S16 OPTICAL MOUSE WIRED

Бренд: PORT DESIGNS Страницы: 1

Бренд: ASI Страницы: 18

Satellite C50-K

Бренд: dynabook Страницы: 46

Бренд: Gateway Страницы: 52

Chromebook CB315-3H

Бренд: Acer Страницы: 33

Chromebook CB5-132T

Бренд: Acer Страницы: 36

Бренд: Acer Страницы: 32

Latitude 3390 2-in-1

Бренд: Dell Страницы: 90

Бренд: Hama Страницы: 41

Бренд: Prestigio Страницы: 195

Бренд: Packard Bell Страницы: 28

Бренд: Ram Mounts Страницы: 2

Бренд: MSI Страницы: 82

USB Mobile Port Replicator

Бренд: Targus Страницы: 16

Бренд: Origin Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды