Toshiba Satellite L30 Series Скачать руководство пользователя

Страница: 108 / 178

6-10

User’s Manual

Power and Power-Up Modes

Retaining data with power off

When you turn off your computer with fully charged batteries, the batteries

retain data for the following approximate time periods.

Extending battery life

To maximize the life of your battery pack:

■

At least once a month, disconnect the computer from a power source

and operate it on battery power until the battery pack fully discharges.

Before doing so, follow the steps below.
1. Turn off the computer's power.
2. Disconnect the AC adaptor and turn on the computer's power. If it

does not turn on go to step 4.

3. Operate the computer on battery power for five minutes. If the

battery pack has at least five minutes of operating time, continue

operating until the battery pack is fully discharged. If the

Battery

indicator flashes or there is some other warning to indicate a low

battery, go to step 4.

4. Connect the AC adaptor to the computer and the power cord to a

power outlet. The

Battery

indicator should glow orange to indicate

that the battery pack is being charged. If the

Battery

indicator does

not glow, power is not being supplied. Check the connections for the

AC adaptor and power cord.

5. Charge the battery pack until the Battery indicator glows green.

■

If you have extra battery packs, rotate their use.

■

If you will not be using the system for an extended period, more than

one month, remove the battery pack.

■

Disconnect the AC adaptor when the battery is fully charged.

Overcharging makes the battery hot and shortens life.

■

If you are not going to use the computer for more than eight hours,

disconnect the AC adaptor.

■

Store spare battery packs in a cool dry place out of direct sunlight.

Battery pack (4000 mAh)

About 3 days (Standby mode)
About 30 days (Boot mode)

Battery pack (2000 mAh)

About 1 days (Standby mode)
About 30 days (Boot mode)

RTC battery

30 days

Содержание Satellite L30 Series



















































































































































































Результаты поиска

Содержание Satellite L30 Series

Отзывы:

Похожие инструкции для Satellite L30 Series

Бренды по названию

Популярные бренды

Toshiba Satellite L30 Series, Руководство пользователя

Результаты поиска

Содержание Satellite L30 Series

Отзывы:

Похожие инструкции для Satellite L30 Series

Бренды по названию

Популярные бренды