background image

User’s Manual

2-9

The Grand Tour

CDs

CD-R discs can be written only once. The recorded data cannot be 

erased or changed. 

CD-RW discs can be recorded more than once. Use either 1, 2, or 

4 multi speed CD-RW discs or high-speed 4- to 10-speed discs. The 

write speed of the ultra-speed CD-RW discs (Ultra-speed is available 

on the DVD-ROM & CD-R/RW drive only) is a maximum of 24-speed. 

DVDs

DVD-R and DVD-R DL discs can be written only once. The recorded 

data cannot be erased or changed. 

DVD-RW discs can be recorded more than once. 

DVD-RAM discs can be recorded more than once. 

DVD+R and DVD+R DL discs can be written only once. The recorded 

data cannot be erased or changed. 

DVD+RW discs can be recorded more than once. 

Formats

The drives support the following formats: 

DVD-ROM 

CD-DA 

Photo CD™ (single/multi-session) 

CD-ROM XA Mode 2 (Form1, Form2) 

CD-R

DVD -Video 

CD-Text 

CD-ROM Mode 1, Mode 2 

Enhanced CD (CD-EXTRA) 

CD-RW

DVD-ROM and CD-R/RW drive 

The full-size DVD-ROM and CD-R/RW drive module lets you record data to 

writable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs 

without using an adaptor. 

The read speed is slower at the center of a disc and faster at the outer 

edge. 

DVD read

8 speed (maximum) 

CD read

24 speed (maximum) 

CD-R write

24 speed (maximum) 

CD-RW write

24 speed (maximum, Ultra speed media) 

Содержание Satellite L100-108



























































































































































































Отзывы: