Toshiba Satellite L100-108 Скачать руководство пользователя

Страница: 107 / 186

User’s Manual

6-3

Power and Power-Up Modes

Power indicator

Check the

Power

indicator to determine the power status:

Battery types

The computer has the following batteries:

■

Battery pack (4000 or 2000mAh)

■

Real Time Clock (RTC) battery

Battery pack

When the AC adaptor is not connected, the computer’s main power source

is a removable lithium ion battery pack, also referred to in this manual as

the main battery. You can purchase additional battery packs for extended

use of the computer away from an AC power source.
Before you remove the battery pack, set the computer to Hibernation Mode

or save your data and shut down the computer. Do not change the battery

pack while the AC adaptor is connected.

Green

Indicates power is being supplied to the

computer and the computer is turned on.

Blinking orange

Indicates power is being supplied to the

computer while the computer is in Standby

Mode. The indicator turns on for one second

and off for two seconds.

No light

Under any other conditions, the indicator does

not light.

■

The battery pack is a lithium ion battery, which can explode if not

properly replaced, used, handled or disposed of. Dispose of the battery

as required by local ordinances or regulations. Use only batteries

recommended by TOSHIBA as replacements.

■

Do not remove the battery pack while the computer is in Standby Mode.

Data is stored in RAM, so if the computer loses power it will be

lost.When the computer is powered off in Standby Mode, and the

AC adaptor is not connected, the main battery pack supplies power to

maintain data and programs in memory. If the battery pack is

completely discharged, Standby Mode does not function and the

computer loses all data in memory.

Содержание Satellite L100-108



























































































































































































Результаты поиска

Содержание Satellite L100-108

Отзывы:

Похожие инструкции для Satellite L100-108

Бренды по названию

Популярные бренды

Toshiba Satellite L100-108, Руководство пользователя

Результаты поиска

Содержание Satellite L100-108

Отзывы:

Похожие инструкции для Satellite L100-108

Бренды по названию

Популярные бренды