manualshive.com logo in svg

Toshiba Satellite 5000 Series, Руководство пользователя

Toshiba Satellite 5000 Series - надежный ноутбук с высокой производительностью. Наши бесплатные руководства пользователя помогут вам легко изучить все возможности этого устройства. Скачайте их с нашего сайта manualshive.com прямо сейчас, чтобы легко настроить ваш ноутбук по своему вкусу.

Поделиться
Скачать
background image

Caution

FCC Interference Statement

 Tested to comply with FCC Standards FOR HOME OR OFFICE USE. See FCC
47CFR part 15.19(b)(2). This device complies with part15 of the FCC rules and with
RSS-210 / RSS-139 of the Industry Canada. Operation is subject to the following to
conditions:

◆

This device may not cause harmful interference, and

◆

This device must accept any interference received, including interference that
may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion.

This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encour-
aged to try and correct the interference by one or more of the following measures:

◆

 Reorient or relocate the receiving antenna.

◆

Increase the separation between the equipment and the receiver.

◆

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

◆

Consult the dealer or an experienced radio/TV technician for help.

Note that any changes or modifications to this equipment not expressly approved
by the manufacturer may void the authorization to operate this equipment.

Using Bluetooth™ Module from TOSHIBA
equipment in Japan

In Japan, the frequency bandwidth of 2,400~2,483.5MHz for second generation low-
power data communication systems such as this equipment overlaps that of mobile
object identification systems (premises radio station and specified low-power radio
station).

Содержание Satellite 5000 Series


































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Satellite 5000 Series

WÄRTSILÄ JOVYTEC P Series Operating Manual preview
JOVYTEC P Series
Бренд: WÄRTSILÄ Страницы: 38
Salicru SLC-700-TWIN RT2 (B0) User Manual preview
SLC-700-TWIN RT2 (B0)
Бренд: Salicru Страницы: 48
PARUS SIPB Series User Manual preview
SIPB Series
Бренд: PARUS Страницы: 75
Eaton 10000H Manual preview
10000H
Бренд: Eaton Страницы: 61
Omron S8BA-B120L Instruction Manual preview
S8BA-B120L
Бренд: Omron Страницы: 2
PowerWalker VFI 3000 LCD Technical Details preview
VFI 3000 LCD
Бренд: PowerWalker Страницы: 2
E&C Cheerups 600 Installation Manual And Operators Instructions preview
Cheerups 600
Бренд: E&C Страницы: 8
OPTI-UPS DC12V Specification Sheet preview
DC12V
Бренд: OPTI-UPS Страницы: 1
Centralion MaxPower 1000 User Manual preview
MaxPower 1000
Бренд: Centralion Страницы: 9
Centralion DC UPS User Manual preview
DC UPS
Бренд: Centralion Страницы: 13
Centralion 400VA Service Manual preview
400VA
Бренд: Centralion Страницы: 33
Centralion 1000VA 1500VA User Manual preview
1000VA 1500VA
Бренд: Centralion Страницы: 40
Xtreme Power Conversion TX90-1000 User & Installation Manual preview
TX90-1000
Бренд: Xtreme Power Conversion Страницы: 26
Kohler PowerWAVE 6000 User Manual preview
PowerWAVE 6000
Бренд: Kohler Страницы: 62
Farnell Imperial Series IMD-1000AP Service Manual preview
Imperial Series IMD-1000AP
Бренд: Farnell Страницы: 18
East 6KVA Operation Instructions Manual preview
6KVA
Бренд: East Страницы: 37
Eaton Callisto 5PX RT G2 Service Manual preview
Callisto 5PX RT G2
Бренд: Eaton Страницы: 60
Eaton Powerware 5130 Rack/Tower UPS 1250-3000 VA User Manual preview
Powerware 5130 Rack/Tower UPS 1250-3000 VA
Бренд: Eaton Страницы: 74

Бренды по названию

Популярные бренды

Загрузить еще бренды