Toshiba Satellite 1955 Series, Руководство по ресурсам

Страница: 7 / 56

7
Setting up your computer and getting started
RG 5.375 x 8.375 ver 2.3.2
You also need a suitable printer cable, which may come with
your printer. Otherwise, you can purchase one from a
computer or electronics store.
If your printer is ECP- or IEEE-compliant, make sure your printer
cable is an IEEE 1284 cable.
Installing additional memory (optional)
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Standby or Hibernation mode, data will be
lost.
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
There are two memory slots available for you to add
additional memory modules.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
To avoid damaging the computer’s screws, use a standard Phillips
no. 1 screwdriver that is in good condition.
If the computer is on, begin at step 1; otherwise, skip to
step 3.
1 If the computer is on, click Start , Turn Off Computer .
The Turn off computer window appears.
2 Click Turn Off .
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer.
4 Remove the battery.