Toshiba Satellite 1130 Series, Руководство пользователя

Страница: 167 / 188

Wireless LAN
Satellite 1130 Series H-4
Satellite 1130 Series
Version
1
Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
Supported frequency sub-bands
Subject to the radio regulations that apply in your country/region, your
Wireless LAN card may support a different set of 2.4 GHz channels (see
following table).
Consult your Authorised Wireless LAN or TOSHIBA Sales office for
information about the radio regulations that apply in your country/region.
Wireless IEEE 802.11 Channels Sets
Frequency Range 2400-2483.5 MHz
Channel ID
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7
2442
8 2447
9 2452
10 2457*
11 2462
* Factory-set default channels
When installing Wireless LAN cards, the channel configuration is
managed as follows:
For Wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
For Wireless LAN cards installed in Wireless clients operating in a
peer-to-peer mode, the card will use the default channel 10.
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.