TOSHIBA
Inserting and withdrawing the memory card
the
Inserting the memory card:
I forward the right end of the door of
the display control section to open it and
then perform the following.
Insert the memory card into the guide
with the upper surface of the card
facing toward the right;
Be sure to insert the memory card to
the full stop.
When inserted fully, the memory card
end becomes aligned with the front and
of the printed circuit board.
If the memory card still projects from
the board (card is not fully inserted),
push it further to the complete stop.
Withdrawing the memory card:
Reverse the
process.
Printed circuit
Before insertion
After insertion
(fully inserted)
www
. ElectricalPartManuals
. com
