Toshiba RSM 100, Инструкция по эксплуатации

Страница: 13 / 173

⎯
12
⎯
6 F 2 S 0 7 1 5
2.8 Menu Items
The RSM100 software can operate either on-line (i.e. communicating with a relay) or off-line.
The RSM100 software has six menus named
Record, Status, Setting
,
Test, PLC tool
and
MIMIC tool
. The
PLC tool
and
MIMIC tool
are applied to some of relay model.
The
Record
menu enables the fault, event and disturbance records stored in the relay to be viewed.
The
Status
menu enables the power system quantities and the status of binary inputs, binary
outputs and measuring elements to be viewed.
The
Setting
menu enables the settings to be viewed or changed.
The
Test
menu is used to perform commissioning tests or maintenance tests.
The
PLC tool
is software used to edit PLC (Programmable Logic Control) function.
The
MIMIC tool
is software used to edit MIMIC configuration picture.
In the on-line operation, all the menus are accessible but in the off-line operation, the
Status
menu
and
Test
menu are inaccessible. In case of remote connection (including Ethernet LAN), however,
Test
menu are inaccessible.
Appendix A shows the hierarchy of menu items.
Note:
The operation procedure of
Waveform data analysis
in the
Record
menu is detailed in
Appendix B.
Note:
If “Decimal symbol” of “Regional and language options” in “Control panel” is set to “,”
(Comma), the decimal symbol of electric quantities, numerical values and setting values on
Record, Status and Setting screens is expressed by comma (,). However, a numerical value
for selection item is expressed by period (.) because it is dealt with a character.