Toshiba Regza 42XV545U, Руководство пользователя

Страница: 20 / 82

20
XV545U (E/F) Web 177.8:228.6
Chapter 3: Using the remote control
Preparing the remote control
for use
Your TV remote control can operate your TV and many
other devices such as cable converter boxes, satellite
receivers, VCRs, DVD players, and HTIBs (home theater
in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate
most Toshiba devices (
-
page 24).
If you have a non-Toshiba device or a Toshiba
device that the remote control is not
preprogrammed to operate:
You can program the TV remote control so it will operate
the other device (
-
pages 22–32).
Installing the remote control
batteries
1
Slide the battery cover off the back of the remote
control.
2
Install two “AA” size alkaline batteries. Match the +
and – symbols on the batteries to the symbols on the
battery compartment.
3
Slide the battery cover on to the remote control until
the lock snaps.
Caution: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
Note:
• Be sure to use AA size alkaline batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
• Always remove batteries from the remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
52XV545U_EN.book Page 20 Monday, August 4, 2008 10:54 AM