Toshiba Regza 42XV545U, Руководство пользователя

Страница: 10 / 82

10
XV545U (E/F) Web 177.8:228.6
Chapter 1: Introduction
TV front and side panel controls and connections
Model 42XV545U is used in this manual for illustration purposes.
4 1 2 3
10
7
6
8
9
11
12
13
14
5
Control panel
Right side panel TV front
1 TOSHIBA Illumination
The TOSHIBA logo will be illuminated by the LED
backlight. See "Selecting the TOSHIBA Illumination
mode" on page 41 for additional information.
2 Auto Brightness Sensor
This sensor will detect the ambient light conditions
to optimize the backlighting levels. See "Using the
Auto Brightness Sensor" on page 66 for additional
information.
3 Remote sensor — Point the remote control toward
this remote sensor.
Effective range:
4 Green and Yellow LEDs
Green = Power indicator
Yellow = Power-On Mode indicator (
-
“Selecting
the Power-On Mode” on page 41)
See “LED indications” on page 71 for additional
information.
5 VIDEO 2 IN — The side panel A/V connections are
referred to as “
VIDEO 2
” and include standard A/V
connections.
6 POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on the
remote control or TV control panel and you cannot
turn off the TV, press and hold the POWER button
on the TV control panel for 5 or more seconds to
reset the TV.
7 ARROWS
BbC c
— When a menu is on-screen,
these buttons function as up/down/left/right menu
navigation buttons.
8 MENU (ENTER) — Press to access the menu system
(
-
page 33). When a menu is on-screen, the MENU
button on the TV’s control panel functions as the
ENTER button.
9 EXIT — Press to instantly close an on-screen menu.
10 CHANNEL
Bb
— When no menu is on-screen, these
buttons change the channel (programmed channels
only;
-
page 36).
11 VOLUME
C c
— These buttons adjust the volume
level.
12 INPUT — Repeatedly press to change the source you
are viewing ( ANT/CABLE, VIDEO 1, VIDEO 2,
ColorStream HD1, ColorStream HD2, HDMI 1,
HDMI 2, HDMI 3, HDMI 4, PC
).
13 HDMI ™ IN — High-Definition Multimedia Interface
(HDMI 4) input receives digital audio and
uncompressed digital video from an HDMI device
or uncompressed digital video from a DVI device.
HDMI connection is necessary to receive 1080p
signals.
14 Service port
— For service use only. Used for
updating the television’s firmware.
16.4 ft (5m)
52XV545U_EN.book Page 10 Monday, August 4, 2008 10:54 AM