4
5. Press
to select desired operation.
6. Press
or
to select desired temperature.
• The temperature can be set between 17°C and 30°C.
7. Press
to select the desired fan speed.
8. Add operations, if required.
• Press
to use 8°C operation.
(Notes: Fireplace cannot select and memorize in weekly
function)
• Press
to use ECO operation.
• Press
to use Hi POWER operation.
• Press
to use Silent operation.
9. Adding or editing the program.
The program can be set to perform on all the required days
until
is pressed to con
fi
rm the setting 10. If adding or
editing a program is required, please repeat steps 2 - 8 before
setting con
fi
rmation.
10. After adding or editing, press
to con
fi
rm the setting*.
Operating Mode
Weekly timer running
Next program
Timer ON or OFF
Next operation time
Operating Temperature and
Fan speed
Display after
pressing SET button
* Point remote control at air conditioner receiving module then,
press SET button until you hear the “PiPi” sound. This means
the setting operation has been completed. As the air conditioner
is receiving the signal, you will hear separate “Pi” sounds
corresponding to the number of days in the selected setting.
An incomplete setting is indicated if the TIMER lamp is blinking.
Press
twice.
Notes:
1. Place the remote control where the indoor unit can receive the
signal. This will increase the accuracy of the timing between
the remote control and the air conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER
operation. In this situation, the air conditioner will
fi
rst follow
the normal timer until it is complete; then, it will return to the
WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such
as MODE, TEMP, FAN, Hi POWER, ECO and etc., can be
adjusted but when the clock reaches the program setting, the
operation will return to the set items in the program.
4. When the remote control is sending a signal to the air
conditioner, avoid interference from objects that can block the
signal.
Edit Weekly timer program
To edit the program after con
fi
rming the weekly
timer setting, follow steps 1 - 3 below.
1. Press
.
• The day of the week and the program
number of the current day will be displayed.
2. Press
to select the day of the week
and press
to select program number
to be con
fi
rmed.
• Resetting the operation.
3. Press
to exit con
fi
rming mode.
Deactivating WEEKLY TIMER operation
Press
while “WEEKLY” is displayed on
the LCD.
•
The “WEEKLY” indicator will disappear from
the LCD. However, the program will remain in
the remote control.
• The TIMER lamp goes off.
•
To reactivate the WEEKLY TIMER operation
again, press
again, LCD shows the
next program. The program, after reactivation,
is related to the clock time.
To delete programs
The individual program
1. Press
.
• The day of the week and the program
number is displayed.
• Select the day to delete the program.
2. Press
to select the program number to
be deleted.
3. Press
.
• ON or OFF timer will be cleared and the
LCD will blink.
4. Press
to delete the program.
• Press
while the LCD is blinking.
The program has now been deleted.
All programs
1. Press
.
• The day of the week and the program
number will be displayed.
2. Press
and hold for 3 seconds.
• All programs will be deleted and LCD
displays current operation.
Notes :
Make sure the remote control receiving module
on the air conditioner receives the signal from the
remote control.
