3
REMOTE CONTROL A-B SELECTION
13
POWER-SELECTION AND SILENT
OPERATION (OUTDOOR UNIT)
14
To separate using of remote control for each indoor unit in
case of 2 air conditioners are installed nearly.
Remote Control B Setup.
1. Press RESET button on the indoor unit to turn the air
conditioner ON for Hi-wall type or press and hold MODE
button on the indoor unit more than 20 seconds for
Bi-
fl
ow console type. (Please follow the instructions in the
air conditioner owner’s manual.)
2. Point the remote control at the air conditioner.
3. Push and hold
button on the Remote Control by
the tip of the pencil. “00” will be shown on the display.
(Picture
1
)
4. Press
during pushing
. “B” will show on the
display and “00” will disappear and the air conditioner will
turn OFF. The Remote Control B is memorized.
(Picture
2
)
Note:
1. Repeat above step to reset Remote Control to be A.
2. Remote Control A has not “A” display.
3. Default setting of Remote Control from factory is A.
1
2
Power-Selection (
)
This function is used when the circuit breaker is shared with
other electrical appliances. It limits the maximum current
and power consumption to 100%, 75%, or 50% and can be
implemented by POWER-SELECTION. The lower percentage,
the higher saving and also longer compressor lifetime.
Note
:
• When the level is selected, POWER-SEL level
fl
ashes on
remote LCD display for 3 seconds.
In case of 75% and 50% level, number “75” or “50” also
fl
ashes for 2 seconds.
• Due to the reason that POWER-SELECTION function
limits the maximum current, inadequate cooling or
heating capacity may occur.
Silent Operation (
)
Keep outdoor unit operating silently to ensure either yourself
or neighborhood will have a tight sleep in nighttime. By this
feature, the heating capacity will be optimized to deliver such
silent experience. The silent operation can be selected from
one of two purposes (Silent 1 and Silent 2).
There are three setting parameters: Standard level > Silent 1
> Silent 2
Silent 1:
Though operating silently, the Heating (or Cooling) capacity
is still prioritized to ensure having suf
fi
cient comfort inside the
room.
This setting is a perfect balance between the Heating
(or Cooling) capacity and the Sound level of outdoor unit.
Silent 2:
Compromising the Heating (or Cooling) capacity to the Sound
level in any circumstance where the outdoor unit’s sound level
is highly prioritized.
This setting has a purpose to reduce the maximum sound level
of outdoor unit by 4 dB(A).
WEEKLY TIMER OPERATION
15
How to set WEEKLY TIMER
1. Press
to enter WEEKLY TIMER
setting.
Blink
2. Press
to select desired day in
sequence.
The sequence of day symbol appears on the
LCD.
SU
t
MO
t
TU
t
WE
t
TH
t
FR
t
SA
WEEKLY SUMO
TUWETHFRSA
(All day)
3. Press
to select the program number.
• The program 1 is ready for setting while
is pressed PG-1 appears on the
LCD.
• Press
to change the program
number in the sequence program 1 to
program 4.
PG-1
PG- 2
PG- 3
PG- 4
4. Press
or
to select the desired
time.
• The time can be set between 0:00 and 23:50
in 10 minute intervals.
• Press and hold the button to change setting
time for 1 hr.
• Only one of ON or OFF timer can be set on
each program.
ON timer display
OFF timer display*
* OFF timer is used to stop the air conditioner
only. The display does not show Operation
mode, Temperature, Fan speed and others.
Note
:
• While activating of Silent operation, inadequate heating
(or cooling) capacity may occur.
Power-Selection and Silent Operation (Outdoor Unit)
[100%]
[75%]
[50%]
SILENT#2
SILENT#1
