No.
⑤
Part name
Procedure
Remarks
1.
Detachment
1)
Remove the screw A fixing the bottom p
late
(fan side).
Loosen the screw B.
2)
Slide the bottom plate (fan side) to the arrow
direction and remove the
bottom plate (fan side).
2.
Attachment
1)
Hang the bottom plate (fan side) to the screw B.
2)
Attach the removed screw A to the original positions.
3) Attach the bottom plate (fan side) as before.
Bottom plate
(fan side)
Screw
A
Screw
B
Bottom plate
(fan side)
NOTE 2
Be sure to wire as before.
2.
Attachment
1)
Mount the noise filter P.C. board in the electrical parts
box as before.
2)
Be sure to wire in the electric parts box as before.
NOTE 1
Check if there is no missing or contact failure
of the connectors.
3
) Attach the electrical parts box cover as before.
④
Noise filter
P.C. board
MCC-1551
1.
Detachment
1)
Perform 1 of
①
to remove the electrical parts box cover.
2)
Remove the connector of the below No. from the P.C .
board.
CN01 : Power supply (Red wire)
CN02 : Power supply (White wire)
CN03 : Power supply (Red wire)
CN04 : Power supply (White wire)
3) Remove the screw of the earth wire.
4) Unlock the card edge spacers (4 positions) in the
electrical parts box to remove the noise filter P.C. board.
NOT
E
First unlock the housing and then remove the
connectors.
Earth screws
Power supply
CN04
CN03
CN02
CN01
- 90 -
