–
40
–
10. INSTALLATION PROCEDURE
10-1. Installation Diagram of Indoor and Outdoor Units
A
C
L
• Loading Batteries
1. Remove the battery cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Before installing the wireless remote controller
3 Batteries
2 Wireless remote controller
Insulate the refrigerant pipes separately
with insulation, not together.
2
3
8
4
Insert the cushion between the indoor
unit and wall, and tilt the indoor unit for
better operation.
For the rear left and left piping
Wall
Make sure to run the drain hose sloped
downward.
Do not allow the drain hose to get slack.
Cut the piping
hole sloped
slightly.
The auxiliary piping can be connected to
the left, rear left, rear right, right, bottom
right or bottom left.
Right
Rear
right
Bottom
right
Rear
left
Bottom left
Left
8 mm thick heat resisting
polyethylene foam
1
Batteries
Pan head
wood screw
Remote control holder
Wireless remote control
Shield pipe
(Attach to the front panel.)
Air
fi
lter
Installation
plate
50 mm or more
170 mm or more
170 mm or more
Remark :
• Detail of accessory and installation parts can see in the accessory sheet.
• Some pictures might be different from the actual parts.
5
,
6
Filter
Hook
Hook
å
CAUTION
Install in rooms that are 13 m
3
or larger.
If a leak of refrigerator gas occurs inside the room, an oxygen de
fi
ciency
can occur.
