WEEKLY TIMER OPERATION
23
How to set WEEKLY TIMER
1. Press
to enter WEEKLY TIMER setting.
2. Press
to select desired day in sequence.
The sequence of day symbol appears on the LCD.
3. Press
to select the program number.
• The program 1 is ready for setting while
is
pressed PG-1 appears on the LCD.
• Press
to change the program number in
the sequence program 1 to program 4.
4. Press
or
to select the desired time.
• The time can be set between 0:00 and 23:50 in
10 minute intervals.
• Press and hold the button to change setting time
for 1 hr.
• Only one of ON or OFF timer can be set on each
program.
*OFF timer is used to stop the air conditioner only.
The display does not show Operation mode,
Temperature, Fan speed and others.
5. Press
to select desired operation.
6. Press
or
to select desired temperature.
• The temperature can be set between 17°C and 30°C.
7. Press
to select the desired fan speed.
8. Add operations, if required.
• Press
to use 8°C operation.
(Notes: Fireplace cannot select and memorize in
weekly function)
• Press
to use ECO operation.
• Press
to use Hi-POWER operation.
• Press
to use Silent operation.
• Press
to use Floor operation.
9. Adding or editing the program.
The program can be set to perform on all the required
days until
is pressed to confirm the setting 10.
If adding or editing a program is required, please
repeat steps 2 - 8 before setting confirmation.
10. After adding or editing, press
to confirm the
setting*.
*Point remote control at air conditioner receiving module
then, press SET button until you hear the “Beep Beep”
sound.
This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will
hear separate “Beep” sounds corresponding to the
number of days in the selected setting.
An incomplete setting is indicated if the TIMER lamp is
blinking. Press
twice.
Edit Weekly timer program
To edit the program after confirming the weekly timer
setting on Page 3 , follow steps 1 - 3 below.
1. Press
.
• The day of the week and the program number of the
current day will be displayed.
2. Press
to select the day of the week and
press
to select program number to be
confirmed.
• Resetting the operation.
3. Press
to exit confirming mode.
Deactivating WEEKLY TIMER operation
Press
while “WEEKLY” is displayed on the LCD.
• The “WEEKLY” indicator will disappear from the
LCD. However, the program will remain in the remote
control.
• The TIMER lamp goes off.
• To reactivate the WEEKLY TIMER operation,
press
again, LCD shows the next program.
The program after reactivation, is related to the clock
time.
To delete programs
The individual program
1. Press
.
• The day of the week and the program number is
displayed.
• Select the day to delete the program.
2. Press
to select the program number to be
deleted.
3. Press
.
• ON or OFF timer will be cleared and the LCD will
blink.
4. Press
to delete the program.
• Press
while the LCD is blinking. The program
has now been deleted.
All programs
1. Press
.
• The day of the week and the program number will
be displayed.
2. Press
and hold for 3 seconds.
• All programs will be deleted and LCD displays
current operation.
Notes :
Make sure the remote control receiving module on the air
conditioner receives the signal from the remote control.
Blink
WEEKLY SUMO
TUWETHFRSA
(All day)
SU
PG-1
PG- 2
PG- 3
PG- 4
MO
TU
WE
TH
FR
SA
ON timer display
OFF timer display*
Operating Mode
Weekly timer running
Display after
pressing SET
button
Next operation
time
Operating Temperature
and Fan speed
Timer ON or OFF
Next program
EN
Notes :
1. Place the remote control where the indoor unit can receive the signal.
This will increase the accuracy of the timing between the remote control and
the air conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In this
situation, the air conditioner will first follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP,
FAN, Hi-POWER, ECO and etc., can be adjusted but when the clock reaches
the program setting, the operation will return to the set
items in the program.
4. When the remote control is sending a signal to the air conditioner, avoid
interference from objects that can block the signal.
1112150136-00_S01_182x257_16p_S_p70_190923.indd 7
1/24/2020 2:58:56 PM
