FILE NO. SVM-16030
-2
- 49 -
Item
Operation flow and applicable data, etc.
Description
2. Press
to rise or decrease the
brightness in 4 levels.
16. Display lamp
brightness
adjustment
1. Press and hold
for 3 seconds until brightness level (
, ,
or
) is shown on
remote controller display.
Remote control
LCD
Operation display
Brightness
Lamp illuminates full brightness.
100%
Lamp illuminates 50% brightness.
50%
Lamp illuminates 50% brightness and the operation lamp
is turned off.
50%
All lamps are turned off.
All turned off
●
In the examples of
and
, the lamp illuminates for 5 seconds before
going off.
FAN
17
. Operation
mode
select table
2.
1. Purpose
Choosing the operating system as
appropriate in real condition
Operation
Factory default setting prefer
"Heat pump" system. Through it is
able to cooling only system heating
only system or return to factory
default.
Operating system setting
•
•
•
Do cut J804 for cooling only system
Do cut J805 for heating only system
Do cut both of J804 and J805 for return
to factory default.
To decrease the display lamp brightness or turn it off.
AMP Air Conditioning
www.ampair.co.uk | [email protected]
