User Manual
Page 19
Remote Control Specifi cations
Function Buttons
REMOTE CONTROL OPERATING INSTRUCTIONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions section of this manual.
Model
RG57H(B)/BG(C)E-EU1
Rated voltage
3.0V (Dry batteries R03/LR03x2)
Signal receiving range
8 m
Environment
-5°C ~ 60°C (23°F ~ 140°F)
ON/OF F
T E MP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
LED
SLEEP
SWING
SHORT CUT
Sets and activates your favorite pre-settings.
ON/OFF
Turns the unit on or off.
S
TEMP
Increases temperate in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
TIMER ON
Sets timer to turn unit on (see
How to Use
Basic Functions
for instructions)
TIMER OFF
Sets timer to turn unit off (see
How to Use
Basic Functions
for instructions)
LED
Turns indoor unit s LED display on and off.
If you are sensitive to light when you go to
sleep, you can press the LED button to turn
off the LED display on the unit. Press the
button again to turn it back on.
SWING
Starts and stops
louver movement.
SLEEP
Saves energy during
sleeping hours.
T
TEMP
Increases temperate in 1°C (1°F) increments.
Max. temperature is 17°C (62°F).
NOTE:
Press and hold and buttons
together for 3 seconds will alternate the
temperature display between the °C & °F scale.
T
S
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
J
J
J
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT FAN
J
J
J
J
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cooling only type. Heat mode is
not supported by the cooling
only appliance.
NOTE
RG57H1(B)/BG(C)E-M without med fan speed.
O
per
ating
Instruc
tions
(W
ith Remot
e)
