![background image](http://html.mh-extra.com/html/toshiba/qosmio-x500/qosmio-x500_maintenance-manual_428864206.webp)
Replacement Procedures
Qosmio X500 Maintenance Manual (960-Q08)
4-47
Installing the touch pad
The following describes the procedure for installing the touch pad.
1.
Peel off the separator covering on the sensor portion of a new touch pad.
NOTE
: Do not reuse the touch pad so that it can not be used after peeling off from the
computer. Be sure to stick a new touch pad.
When sticking the touch pad, be careful not to get the bubbles under the touch
pad.
2.
Stick and install the
touch pad
on the top cover assembly.
3.
Install the
touch pad
plate
and secure it with the following
screws
.
M2.5
3.0 SUPER THIN HEAD screw
x10
4.
Stick the
insulator
on the touch pad plate.
5.
Connect the
touch pad
flat cable
to the connector on the touch pad and stick the
glass tape
on the connector.
Содержание Qosmio X500
