Toshiba Qosmio E10 страница 199 Скачать руководство пользователя

Страница: 199 / 373

3.29 SETUP

3 Tests and Diagnostics

(d) Auto Power On

This option displays setting for Auto Power On.

Disabled

Indicates auto power on is not set.

Enabled

Indicates auto power on is set.

When “Enabled” is selected, the following sub-window appears.

Alarm Time

00:00:00

Alarm Date Option

= Disabled

Ring Indicator

= Disabled

OPTIONS

Set the parameters for the Auto Power On (automatic power on) function in
the “OPTIONS” window. To set the time, use

Space

BackSpace

. Press

↓

to move the cursor to the right and

↑

to move the cursor to the left when

you set the date and time.

For the

Alarm Time

, set the time to turn on the power automatically. The

“second” cannot be set. When it is set to “Disabled”, the time to turn on
automatically is not set.

For the

Alarm Date Option

, set the date to turn on the power automatically.

When it is set to “Disabled”, the time to turn on automatically is not set.

The

Ring Indicator

is displayed only when the computer is in Resume mode

and this function cannot be used for a PC card-type modem. When any
modem is not installed, it is not displayed.

NOTE:

1. Do not remove the AC adaptor and battery pack at the same time when you

use this feature. If you do so, data saved by the resume function will be lost.

You must also reset this option.

2. If you have set a password and the computer boots by the Auto Power On

function and Resume is on, the computer will start with the instant security

function

enabled.

The

password =

message is not displayed; however, you

must enter the password to use the computer.

3. This option is enabled only once, the setting is reset, after booting up.

(e) Start Up Logo

This option enables or disables an animation logo function.

Animation

Enables the animation logo function. (Default)

Picture

Disables the animation logo function

QOSMIO E10 Maintenance Manual (960-492)

3-87

Содержание Qosmio E10






















































































































































































































































































































































































Результаты поиска

Содержание Qosmio E10

Отзывы:

Похожие инструкции для Qosmio E10

Бренды по названию

Популярные бренды

Toshiba Qosmio E10, Руководство по обслуживанию

Результаты поиска

Содержание Qosmio E10

Отзывы:

Похожие инструкции для Qosmio E10

Бренды по названию

Популярные бренды