Toshiba PTM70U-00C007 Скачать руководство пользователя страница 50

Страница: 50 / 244

2-16

User’s Manual

The Grand Tour

AC adaptor

The AC adaptor can automatically adjust to any voltage ranging from 100 to

240 volts and to a frequency of either 50 or 60 hertz, enabling you to use

this computer in almost any country/region. The adaptor converts AC

power to DC power and reduces the voltage supplied to this computer.
To recharge the battery, simply connect the AC adaptor to a power source

and the computer. Refer to Chapter 6,

Power and Power-Up Modes

for

details.

The AC adaptor (2-pin plug)

The AC adaptor (3-pin plug)

■

Depending on the model, a 2-pin plug or 3-pin plug set of the above

may be bundled.

■

Do not use a 3-pin to 2-pin conversion plug.

■

The supplied power cord conforms to safety rules and regulations in

the region the product is bought and should not be used outside this

region. For use in other regions, please buy power cords that conform

to safety rules and regulations in the particular region.

Always use the TOSHIBA AC adaptor that was provided with your PC and

the TOSHIBA Battery Charger (that may have been provided with your

PC), or use AC adaptors and battery chargers specified by TOSHIBA to

avoid any risk of fire or other damage to the PC. Use of an incompatible

AC adaptor or Battery Charger could cause fire or damage to the PC

possibly resulting in serious injury.

Содержание PTM70U-00C007





















































































































































































































































Результаты поиска

Содержание PTM70U-00C007

Отзывы:

Toshiba PTM70U-00C007, Руководство пользователя, Страница: 50 / 244

Результаты поиска

Содержание PTM70U-00C007

Отзывы: