Toshiba PTM70U-00C007 Скачать руководство пользователя страница 105

Страница: 105 / 244

User’s Manual

4-17

Operating Basics

In the help file, it is stated that this software’s PasswordBank function can

be used for the Internet and general applications. However, the Internet

PasswordBank function in the fingerprint utility provided in this computer

can only be used with IE (Internet Explorer).

Set Up Procedure

Please use the following procedure when first using fingerprint

authentication.

Fingerprint Registration

Enroll the required authentication data using the “User Enrollment” Wizard.

1. Click

start

, point to

All Programs

, point to

Protector Suite QL

and

click

User Enrollment

Wizard.

2. Click

Next

3. The

User’s Password

screen is displayed. Ensure the same Windows

logon username is displayed before entering a password into the

Enter

your password

field. Click

Next

4. The

Hints for Fingerprint

Enrollment

screen is displayed.

Confirm the message and that there is a checkmark in

Run Interactive

Tutorial

, and click

Next

5. The

Correct Swipe Procedure

screen is displayed. Confirm the

message and click

Next

6. The

Scanning Practice

screen is displayed.

You can practice swiping your finger and when you have finished

practicing swiping your finger, click

Next

7. The

User’s Fingers

screen is displayed. Based on the illustration,

select the finger to be recognized, and then click

Next

. Previously

enrolled fingerprints would have green check marks. The fingerprint

being enrolled now would have a red check mark. If any of the

previously enrolled fingerprints is selected again, the latest information

will be enrolled and previous information over-written.

8. The

Advanced Security

screen is displayed.

Select whether to enable the security function, and click

Next

9. The

Finalization

screen is displayed. Click

Finish

. This completes the

fingerprint registration process.

■

The fingerprint authentication uses the same Windows logon ID and

password. If the Windows logon password has not been setup, please

do so before registration.

■

Up to 21 fingerprint patterns can be registered on this sensor.

You can also start User Enrollment Wizard using the following method.

■

Click the Protector Suite QL icon in the Task Bar.

■

Swipe your finger across the Fingerprint Sensor.

Содержание PTM70U-00C007





















































































































































































































































Результаты поиска

Содержание PTM70U-00C007

Отзывы:

Toshiba PTM70U-00C007, Руководство пользователя, Страница: 105 / 244

Результаты поиска

Содержание PTM70U-00C007

Отзывы: