Toshiba PTM70U-00C007 Скачать руководство пользователя страница 168

Страница: 168 / 244

7-6

User’s Manual

HW Setup & BIOS Setup

CPU

This function lets you set the CPU operating mode.

Dynamic CPU Frequency Mode

This option lets you choose from the following settings:

LAN

Wake-up on LAN

This feature lets the computer’s power be turned on when it receives a

wake-up signal from the LAN.

Built-in LAN

This feature enables or disables the Built-in LAN.

This option is displayed only for models with an Intel

Core™ Duo

processor and Intel

Core™ Solo processor.

Dynamically

Switchable

CPU power consumption and clock speed

automatic switching function is enabled. When

the computer is in use, CPU operation is

automatically switched when necessary

(Default).

Always High

CPU power consumption and clock speed

automatic switching function is disabled. The

CPU always runs at its fastest speed.

Always Low

CPU power consumption and clock speed

automatic switching function is disabled. The

CPU always runs at low power consumption and

low speed.

Enabled

Enables Wake-up on LAN.

Disabled

Disables Wake-up on LAN (Default).

Do not install or remove an optional memory module while Wake-up on

LAN is enabled.

The Wake-up on LAN function consumes power even when the system is

off. Leave the AC adaptor connected while using this feature.

Enabled

Enables Built-in LAN functions (Default).

Disabled

Disables Built-in LAN functions.

Содержание PTM70U-00C007





















































































































































































































































Результаты поиска

Содержание PTM70U-00C007

Отзывы:

Toshiba PTM70U-00C007, Руководство пользователя, Страница: 168 / 244

Результаты поиска

Содержание PTM70U-00C007

Отзывы: