User’s Manual
iv
Working environment
This product was designed to fulfill the EMC (Electromagnetic
Compatibility) requirements for “residential, commercial and light industry
environments”.
The following environments are not approved:
■
Industrial Environments (e.g. enivronments with a mains voltage
> 380V~)
In the following environments the use of this product can be restricted:
■
Medical Environments: This product is not certified as a medical
product according to the Medical Product Directive 93/42/EEC.
■
Vehicle Environments: Please read the operator’s manual of the
vehicle manufacturer for further restrictions of use.
■
Aircraft Environments: Please follow the advices of the flight
personnel regarding restrictions of use.
Any consequences resulting from the use of this product in working
environments that are not approved or the use is restricted are not the
responsibility of TOSHIBA Corporation. The consequences of the use of
this product in those working environments may be:
■
Interference with other devices or machines in the nearby
surrounding area
■
Malfunction of or data loss from this product caused by disturbances
generated by other devices or machines in the nearby surrounding
area
Furthermore, for general safety reaons, the use of this product in
environments with explosive atmospheres is not permitted.
CE compliance
This product is labelled with the CE Mark in accordance with the related
European Directives, notably Electromagnetic Compatibility Directive 89/
336/EEC for the notebook and the electronic accessories including the
supplied power adapter, the Radio Equipment and Telecommunications
Terminal Equipment Directive 99/5/EEC in case of implemented
telecommunication accessories and the Low Voltage Directive 73/23/EEC
for the supplied power adapter.
This product and the supplied accessories are designed to observe the
related EMC (Electromagnetic Compatibility) and safety standards.
However, TOSHIBA cannot guarantee that this product still observes these
EMC standards if accessories or cables not manufactured / distributed by
TOSHIBA are connected or implemented. To avoid EMC problems in
general, the following advice should be observed:
■
Only CE marked accessories should be connected / implemented.
■
Only best shielded cables should be connected.
