Toshiba Portege R400 Series, Руководство по обслуживанию

Страница: 171 / 369

3 Tests and Diagnostics
PORTEGE R400 Maintenance Manual (960-623) [CONFIDENTIAL] 3-59
3.26 Wireless LAN Test Program (Intel-made b/g, a/b/g)
This section describes how to perform the wireless LAN transmitting-receiving test (Intel-
made 802.11 b/g or 802.11 a/b/g). To execute the wireless LAN test, use the Diagnostics disk
for wireless LAN test.
Insert the Diagnostics disk for wireless LAN test into the Floppy Disk Drive. Turn on the
power while pressing
U .
The following menu appears in the display.
***********************************************************
* Intel PRO/Wireless XXXABG Network Connection *
* Maintenance T&D Menu *
* *
* 1 : SKU check of Module *
* *
* 2 : MAC Address Check *
* *
* 3 : Antenna Check & communication test of 11b mode *
* *
* 4 : Communication test of 11a mode *
* *
* 5 : Communication test of 11g mode *
* *
* 6 : All the tests of 11a/b/g Card *
* (SKU & MAC Check, 11a/b/g communication test) *
* *
***********************************************************
SELECT TEST No, (1-6):
To execute the subtest, input the subtest number and press Enter .
Subtest01 SKU check of module
This subtest displays SKU information on the wireless LAN card installed.
Selecting this subtest, following message will appear in the display. Confirm
if the right information on the wireless LAN card is described.
*************************************************************
* *
* Module : Module : Intel PRO/Wireless XXXXABG *
* Network Connection (Mow1) *
* G-code : G360001U110 *
* TA No. : D26539 *
* *
*************************************************************
Press any key and return to the test menu. If a defective is found during the
test,
NG message will appear in the display.
Press any key and return to the test menu.